tapgroup

English

  • Tiếng Việt
  • English

Electric Fusion Welded Stainless Steel Pipe A358 Grade 316L 

Product info

Supplier: Tapgroup internation.,JSC
Address: Số 32 Lô N4D, đường X2A, Yên Sở, Hoàng Mai, Hà Nội
Phone: 0084 933 86 77 86
Email: info@tapgroup.vn
Website: https://supplier-pipe-tube-ongthep.com
Insurance: 12 tháng
Status: Mới 100%
Origin: China, Korea, Malaysia, Thailand, Japan, EU, G7
Catalogue Profile
Name Electric Fusion Welded Stainless Steel Pipe A358 Grade 316L  
Type of pipe Electric Fusion Welded Pipe, A358 Grade 316L   EFW Pipe A358 Grade 316L 
Five classes of pipe are covered as follows:
ASTM A358 Class 1 – Pipe shall be double welded by processes employing filler metal in all passes and shall be completely radiographed.
ASTM A358 Class 2 – Pipe shall be double welded by processes employing filler metal in all passes. No radiography is required.
ASTM A358 Class 3 – Pipe shall be single welded by processes employing filler metal in all passes and shall be completely radiographed.
ASTM A358 Class 4 – Same as Class 3 except that the weld pass exposed to the inside pipe surface may be made without the addition of filler metal 
ASTM A358 Class 5 – Pipe shall be double welded by processes employing filler metal in all passes and shall be spot radiographed.
Plate and Filler Metal Specifications
Grade UNS
Designation 		Material,
Typ 		ASTM Plate
Specification No.
and Grade 		Filler Metal Classification and UNS Designation A for Applicable B AWS Specificatio
A5.4/A5.4M A5.9/A5.9M A5.11/A5.11M A5.14/A5.14M A5.22/A5.22M A5.30/A5.30M
Class. UNS Class. UNS Class. UNS Class. UNS Class. UNS Class. UNS
316L S31603 316L A240 E316L W31613 ER316L S31683 … … … … E316LT W31635 IN316L S31683
      Type 316L                        
 Annealing Requirements
Grade or UNS Designation A Heat Treating Temperature B Cooling/Testing Requirements
All grades not individually listed below:
Tất cả các điểm không được liệt kê riêng bên dưới: 		1900 °F [1040 °C] C
304H, 309S, 309Cb, 310S, 310Cb, 1900 °F [1040 °C] D
321H, 347H, S22100, S28300,    
N08020 1800-1850 °F [980-1010 °C] D
N08367 2025 °F [1110 °C] D
N08810 2050 °F [1120 °C] D
N08904 2000 °F [1095 °C D
N08926 2010 °F [1100 °C] D
S30600 2100 °F [1150 °C] D
S30815 1920 °F [1050 °C D
S31254 2100 °F [1150 °C] D
S31266 2100 °F [1150 °C] D
S31727 1975–2175 °F [1080 to 1180 °C] D
S32050 2100 °F [1150 °C] D
S32053 1975–2175 °F [1080 to 1180 °C] D
S32654 2100 °F [1150 °C] D
S34565 2050 °F [1120 °C] D
Dimensions of Welded and Seamless Stainless Steel Pipe 
ASME /ANSI B36.19, Schedule (SCH) SCH 5S, SCH 10S, SCH 20S, SCH 40S, SCH 80S,
ASME /ANSI B36.10, Schedule (SCH) S, SCH 10, SCH 20, SCH 30 SCH STD, SCH 40, SCH 60, SCH XS, SCH 80, SCH 100, SCH 120, SCH 160 SCH XXS SCH XX.H
Type End of pipe end
Plain Ends (PE) The PE pipes will generally be used for the smaller diameters pipe systems and in combination with Slip On flanges and Socket Weld fittings and flanges.
Threaded Ends (TE) The TE implementation speaks for itself, this performance will generally used for small diameters pipe systems, and the connections will be made with threaded flanges and threaded fittings.
Beveled Ends (BE) The BE implementation is applied to all diameters of buttweld flanges or buttweld fittings, and will be directly welded (with a small gap 3-4 mm) to each other or to the pipe. Ends are mostly be beveled to angle 30° (+ 5° / -0°) with a root face of 1.6 mm (± 0.8 mm).
Grooved ends (example Victaulic pipes): these are pipes that allow a quick connection, used for non-critical applications
Threaded and coupled ends (T&C), generally used for gas distribution,
Threaded connections are the most common pipe fittings used in oil and gas transportation systems. Due to external vibrations, cyclic loads, and pollution, the fitting parts may start getting loose, which could result in pipeline leaks and other environmental disasters. It is of great significance to develop a reliable technique that could provide…
Type end : Plain Ends / Beveled Ends: Tubes – Pipe
• Bevel End (BE)
• Bevel Both Ends (BBE)
• Bevel Large End (BLE)
• Bevel One End (BOE)
• Bevel Small End (BSE)
• Bevel for Welding (BFW)
• Buttweld End (BE) 		• End of Pipe (EOP)
• Flange One End (FOE)
• Plain End (PE)
• Plain Both Ends (PBE)
• Plain One End (POE)
• Thread End (TE)
• Thread Both Ends (TBE) 		• Thread Large End (TLE)
• Thread One End (TOE)
• Thread Small End (TSE)
• Threads Only (TO)
• Threads per Inch (TPI)
 Standard: Pipe 
The American Society Of Mechanical Engineers American National Standards Institute
ASME B36.19M ANSI B36.19M
ASME B36.10M ANSI B36.10M
Product related keywords
Electric-Fusion-Welded Pipe A358 Grade 316L SCH 5S Electric-Fusion-Welded Pipe A358 Grade 316L SCH 40
Electric-Fusion-Welded Pipe A358 Grade 316L SCH 10S Electric-Fusion-Welded Pipe A358 Grade 316L SCH 60
Electric-Fusion-Welded Pipe A358 Grade 316L SCH 40S Electric-Fusion-Welded Pipe A358 Grade 316L SCH XS
Electric-Fusion-Welded Pipe A358 Grade 316L SCH 80S Electric-Fusion-Welded Pipe A358 Grade 316L SCH 80
Electric-Fusion-Welded Pipe A358 Grade 316L SCH 5 Electric-Fusion-Welded Pipe A358 Grade 316L SCH 100
Electric-Fusion-Welded Pipe A358 Grade 316L SCH 10 Electric-Fusion-Welded Pipe A358 Grade 316L SCH 120
Electric-Fusion-Welded Pipe A358 Grade 316L SCH 20 Electric-Fusion-Welded Pipe A358 Grade 316L SCH 160
Electric-Fusion-Welded Pipe A358 Grade 316L SCH 30 Electric-Fusion-Welded Pipe A358 Grade 316L SCH XXS
Electric-Fusion-Welded Pipe A358 Grade 316L SCH STD Electric-Fusion-Welded Pipe A358 Grade 316L SCH SS.H
EFW Pipe A358 Grade 316L SCH 5S EFW Pipe A358 Grade 316L SCH 40
EFW Pipe A358 Grade 316L SCH 10S EFW Pipe A358 Grade 316L SCH 60
EFW Pipe A358 Grade 316L SCH 40S EFW Pipe A358 Grade 316L SCH XS
EFW Pipe A358 Grade 316L SCH 80S EFW Pipe A358 Grade 316L SCH 80
EFW Pipe A358 Grade 316L SCH 5 EFW Pipe A358 Grade 316L SCH 100
EFW Pipe A358 Grade 316L SCH 10 EFW Pipe A358 Grade 316L SCH 120
EFW Pipe A358 Grade 316L SCH 20 EFW Pipe A358 Grade 316L SCH 160
EFW Pipe A358 Grade 316L SCH 30 EFW Pipe A358 Grade 316L SCH XXS
EFW Pipe A358 Grade 316L SCH STD EFW Pipe A358 Grade 316L SCH SS.H
Dimensions of Steel Pipes ASME B36.10 and B36.19M
Electric Fusion Welded Stainless Steel Pipe A358 Grade 316L  
1/2 inches  to 2 inches 
NPS 1/2" 3/4" 1" 1¼" 1½" 2"
OD 21.3 26.7 33.4 42.2 48.3 60.3
  Wall Thickness
Sch 5 1.65 1.65 1.65 1.65 1.65 1.65
Sch 5S 1.65 1.65 1.65 1.65 1.65 1.65
Sch 10 2.11 2.11 2.77 2.77 2.77 2.77
Sch 10S 2.11 2.11 2.77 2.77 2.77 2.77
Sch 20 – … – … – …
Sch 30 2.41 2.41 2.90 2.97 3.18 3.18
STD 2.77 2.87 3.38 3.56 3.68 3.91
Sch 40 2.77 2.87 3.38 3.56 3.68 3.91
Sch 40S 2.77 2.87 3.38 3.56 3.68 3.91
Sch 60 – … – … – …
XS 3.73 3.91 4.55 4.85 5.08 5.54
Sch 80 3.73 3.91 4.55 4.85 5.08 5.54
Sch 80S 3.73 3.91 4.55 4.85 5.08 5.54
Sch 100 – … – … – …
Sch 120 – … – … – …
Sch 140 – … – … – …
XXS 7.47 7.82 9.09 9.70 10.15 11.07
Sch 160 4.78 5.56 6.35 6.35 7.14 8.74
NPS = Nominal Pipe Size   O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.
DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness Length Weight
All Diameters = – 12.5% + 6.40 mm / – 0 mm Weight = + 10% / – 1.5%
2 1/2  inches  to 5 inches 
NPS 2½" 3" 3½" 4" 5"
OD 73 88.9 101.6 114.3 141.3
  Wall Thickness
Sch 5 2.11 2.11 2.11 2.11 2.77
Sch 5S 2.11 2.11 2.11 2.11 2.77
Sch 10 3.05 3.05 3.05 3.05 3.40
Sch 10S 3.05 3.05 3.05 3.05 3.40
Sch 20   …     …
Sch 30 4.78 4.78 4.78 4.78 …
STD 5.16 5.49 5.74 6.02 6.55
Sch 40 5.16 5.49 5.74 6.02 6.55
Sch 40S 5.16 5.49 5.74 6.02 6.55
Sch 60   …     …
XS 7.01 7.62 8.08 8.56 9.53
Sch 80 7.01 7.62 8.08 8.56 9.53
Sch 80S 7.01 7.62 8.08 8.56 9.53
Sch 100   …     …
Sch 120   …   11.13 12.7
Sch 140   …     …
XXS 14.02 15.24   17.12 19.05
Sch 160 9.53 11.13   13.49 15.88
NPS = Nominal Pipe Size   O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.
DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness Length Weight
All Diameters = – 12.5% + 6.40 mm / – 0 mm Weight = + 10% / – 1.5%
6 inches  to 14 inches 
NPS 6" 8" 10" 12" 14"
OD 168.3 219 273 323.9 355.6
  Wall Thickness
Sch 5 2.77 2.77 3.40 3.96 3.96
Sch 5S 2.77 2.77 3.40 3.96 3.96
Sch 10 3.40 3.76 4.19 4.57 6.35
Sch 10S 3.40 3.76 4.19 4.57 4.78
Sch 20   6.35 6.35 6.35 7.92
Sch 30   7.04 7.80 8.38 9.53
STD 7.11 8.18 9.27 9.53 9.53
Sch 40 7.11 8.18 9.27 10.31 11.13
Sch 40S 7.11 8.18 9.27 9.53 9.53
Sch 60   10.31 12.70 14.27 15.06
XS 10.97 12.70 12.70 12.70 12.70
Sch 80 10.97 12.70 15.09 17.48 19.05
Sch 80S 10.97 12.70 12.70 12.70 12.70
Sch 100   15.09 18.26 21.44 23.83
Sch 120 14.27 18.26 21.44 25.40 27.79
Sch 140   20.62 25.40 28.58 31.75
XXS 21.95 22.23 25.40 25.40  
Sch 160 18.26 23.01 28.58 33.32 35.71
NPS = Nominal Pipe Size   O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.
DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness Length Weight
All Diameters = – 12.5% + 6.40 mm / – 0 mm Weight = + 10% / – 1.5%
16 inches to 24 inches 
NPS 16" 18" 20" 22" 24"
OD 406.04 457.2 508 558.8 609.6
  Wall Thickness
Sch 5 4.19 4.19 4.78 4.78 5.54
Sch 5S 4.19 4.19 4.78 4.78 5.54
Sch 10 6.35 6.35 6.35 6.35 6.35
Sch 10S 4.78 4.78 5.54 5.54 6.35
Sch 20 7.92 7.92 9.53 9.53 9.53
Sch 30 9.53 11.13 12.70 12.70 14.27
STD 9.53 9.53 9.53 9.53 9.53
Sch 40 12.70 14.27 15.09 … 17.48
Sch 40S 9.53 9.53 9.53 … 9.53
Sch 60 16.66 19.05 20.62 22.23 24.61
XS 12.70 12.70 12.70 12.70 12.70
Sch 80 21.44 23.83 26.19 28.58 30.96
Sch 80S 12.70 12.70 12.70 … 12.70
Sch 100 26.19 29.36 32.54 34.93 38.89
Sch 120 30.96 34.93 38.10 41.28 46.02
Sch 140 36.53 39.67 44.45 47.63 52.37
XXS   …   …  
Sch 160 40.49 45.24 50.01 53.98 59.54
NPS = Nominal Pipe Size   O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.
DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness Length Weight
All Diameters = – 12.5% + 6.40 mm / – 0 mm Weight = + 10% / – 1.5%
26 inches to 48 inches 
26" > 48" Wall Thickness and Weight
NPS OD   5 5S 10
26 660 wt     7.92
kg/m 127.36
28 711 wt     7.92
kg/m 137.32
30 762 wt 6.35 6.35 7.92
kg/m 118.34 118.31 147.29
32 813 wt     7.92
kg/m 157.25
34 864 wt     7.92
kg/m 167.21
36 914 wt     7.92
kg/m 176.97
38 965 wt      
kg/m
40 1016 wt      
kg/m
42 1067 wt      
kg/m
44 1118 wt      
kg/m
46 1168 wt      
kg/m
48 1219 wt      
kg/m
26 – 48 Wall Thickness and Weight
NPS OD   10S 20 30
26 660 wt   12.70  
kg/m 202.74
28 711 wt   12.70 15.88
kg/m 218.71 272.23
30 762 wt 7.92 12.70 15.88
kg/m 132.91 234.68 292.20
32 813 wt   12.70 15.88
kg/m 250.65 312.17
34 864 wt   12.70 15.88
kg/m 266.63 332.14
36 914 wt   12.70 15.88
kg/m 282.29 351.73
38 965 wt      
kg/m
40 1016 wt      
kg/m
42 1067 wt      
kg/m
44 1118 wt      
kg/m
46 1168 wt      
kg/m
48 1219 wt      
kg/m
26 – 48 Wall Thickness and Weight
NPS OD   STD 40 XS
26 660 wt 9.53   12.70
kg/m 152.88 202.74
28 711 wt 9.53   12.70
kg/m 164.86 218.71
30 762 wt 9.53   12.70
kg/m 176.85 234.68
32 813 wt 9.53 17.48 12.70
kg/m 188.83 342.94 250.65
34 864 wt 9.53 17.48 12.70
kg/m 200.82 364.92 266.63
36 914 wt 9.53 19.05 12.70
kg/m 212.57 420.45 282.29
38 965 wt 9.53   12.70
kg/m 224.56 298.26
40 1016 wt 9.53   12.70
kg/m 236.54 314.23
42 1067 wt 9.53   12.70
kg/m 248.53 330.21
44 1118 wt 9.53   12.70
kg/m 260.52 346.18
46 1168 wt 9.53   12.70
kg/m 272.70 361.84
48 1219 wt 9.53   12.70
kg/m 284.25 377.81
NPS = Nominal Pipe Size
O.D. = Outside Diameter
WT = Walltickness
KG/M = Kilogram per meter
Dimensions are in millimeters unless otherwise indicated
Weights are in kilograms p/meter and approximately given
Related products
tapgroup

Mr. Thi

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 982 384 688
tapgroup

Ms. Hoa

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 982 803 586
tapgroup

Ms. Phương

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 971 567 341
tapgroup

Ms. Trinh

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 971 567 943
tapgroup

Ms. Trân

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 971 567 954

tapgroupHỒ CHÍ MINH CN1

Trụ Sở Hồ Chí Minh

Address : Số 8 đường số 20, P. Bình Hưng Hoà, Q. Bình Tân, TP. HCM

Phone : +84 982 384 688 - Email : theptangiabao@gmail.com

tapgroupHỒ CHÍ MINH CN2

Trụ Sở Hồ Chí Minh

Address : 27/9 đường Tân Thới Nhất 08, Phường Tân Thới Nhất, Q12, TP. HCM, VN

Phone : +84 982 384 688 - Email : theptangiabao@gmail.com

tapgroupBÀ RỊA - VŨNG TÀU

Chi Nhánh Bà Rịa - Vũng Tàu

Address : 2597 Đ. Độc Lập, TT. Phú Mỹ, Tân Thành, Bà Rịa - Vũng Tàu, Việt Nam.

Phone : +84 974 618 834 - Email : chinhanhtangiabao@gmail.com

Social network

tapgroup tapgroup tapgroup tapgroup

Copyright 2024 @ TAN GIA BAO DV TRADING INVESTMENT CO.,LTD
tapgroup