Seamless Steel Tube P275NL1, EN 10216-3

Product info

Supplier:	Tapgroup internation.,JSC
Address:	Số 32 Lô N4D, đường X2A, Yên Sở, Hoàng Mai, Hà Nội
Phone:	0084 933 86 77 86
Email:	info@tapgroup.vn
Website:	https://supplier-pipe-tube-ongthep.com
Insurance:	12 tháng
Status:	Mới 100%
Origin:	China, Korea, Malaysia, Thailand, Japan, EU, G7

Catalogue Profile

Description
Dimensions Seamless Steel Tube, EN 10216-3

Product Name:

Seamless Steel Tube P275NL1, EN 10216-3

The alternative name or alias of a product:

Seamless Steel Pipe P275NL1, EN 10216-1

SMLS Pipe P275NL1

SMLS Tube P275NL1

Product Description:

• Material: P275NL1, Non alloy steel Steel
• Number 1.0488
• Type: Seamless (SMLS)
• Standard: EN 10216-3
• Size:
• Outer Diameter (OD): OD10.2 to OD711
• Wall Thickness (WT): 1.6mm, 1.8mm, 2.0mm, 2.3mm, 2.6mm, 2.9mm, 3.2mm, 3.6mm, 4.0mm, 4.5mm, 5.0mm, 5.6mm, 6.3mm, 7.1mm, 8.0mm, 8.8mm, 10.0mm, 11mm, 12.5mm
14.2mm, 16.0mm, 17.5mm, 20.0mm, 22.2mm, 25.0mm, 28.0mm, 30.0mm, 32.0mm, 36.0mm, 40.0mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 80mm, 90mm, 100mm,
• Length: 6000mm To 12000mm
• Surface Treatment: Fusion Bonded Epoxy (FBE, Three-Layer Polyethylene (3LPE), Three-Layer Polypropylene (3LPP), Coal Tar Enamel (CTE), Concrete Weight Coating (CWC), Hot-Dip Galvanizing (HDG), Zinc-Rich Paint Coating: Zinc-rich paint, Aluminum, Ceramic Coating, Polymer Coating, Polyurethane Coating,
Quality Control:
• ISO 9001:, ISO 14001:2015, OHSAS 18001:2007 Quality management systems – Requirements
• Other:
. Certification:
• EN 10204 3.1: Inspection certificate type 2.1, 3.1 and 3.2 issued in accordance with EN 10204
• Shipping: Delivery of goods to the address requested by the customer

Chemical composition

Steel grade

Al tot^b

Nb+Ti+V

Steel name

Steel number

max.

Max.

max.

min.

max.

P275NL1

1.0488

0,16

0,40

0,50 to 1,50

0,025

0,020

0,30^C

0,08^C

0,50

0,020

0,30^Cd

0,05

0,040

0,05

Mechanical properties

Seamless Steel Tube P275NL1 is a type of low-temperature pressure vessel steel that is commonly used in the production of boilers and pressure vessels. It is a seamless tube that conforms to the EN 10216-3 standard and is made from non-alloy and fine-grain steel.
The mechanical properties of Seamless Steel Tube P275NL1 are as follows:

Steel name: P275NL1

Steel number: 1.0488

• Tensile strength: 390-510 Mpa

• Yield strength: 275 Mpa

• Elongation: 23%

• Impact strength: -50°C, ≥27J

These properties make Seamless Steel Tube P275NL1 suitable for use in low-temperature applications, where high strength and toughness are required. It is important to note that these properties may vary depending on the manufacturing process and the specific dimensions of the tube.

Inspection and testings

Seamless steel tubes are widely used in various industries, including oil and gas, petrochemical, and power generation. These tubes are subjected to rigorous inspection and testing to ensure that they meet the required specifications and standards.
P275NL1 is a low-temperature carbon steel material that is commonly used in pressure vessel applications. EN 10216-3 is a European standard that specifies the technical delivery conditions for seamless steel tubes for pressure purposes.
Inspection of seamless steel tubes involves visual inspection, dimensional inspection, and surface inspection. Visual inspection is carried out to detect any defects such as cracks, inclusions, or surface imperfections. Dimensional inspection ensures that the tubes meet the required length, diameter, and wall thickness specifications. Surface inspection involves checking for any corrosion, rust, or other forms of damage.
Testing of seamless steel tubes involves various destructive and non-destructive testing methods. Destructive testing involves testing a sample of the tube to failure to determine its mechanical properties, such as tensile strength, yield strength, and elongation. Non-destructive testing involves testing the tube without damaging it, using methods such as ultrasonic testing, magnetic particle testing, or radiographic testing.
In the case of P275NL1 seamless steel tubes, the following tests may be carried out:
1. Tensile testing: This test determines the mechanical properties of the tube, such as its tensile strength, yield strength, and elongation.
2. Impact testing: This test determines the toughness of the tube at low temperatures.
3. Hardness testing: This test measures the hardness of the tube's surface and helps to assess its resistance to wear and tear.
4. Non-destructive testing: This includes methods such as ultrasonic testing, magnetic particle testing, or radiographic testing, to detect any defects or inconsistencies in the tube's surface or structure.
Overall, the inspection and testing of seamless steel tubes such as P275NL1, EN 10216-3, are essential to ensure their safety and performance in demanding applications.

Pressure and Temperature Ratings

Seamless steel tube P275NL1, EN 10216-3 is a pressure vessel steel that is designed for low-temperature use. The material has a minimum yield strength of 275 MPa and is suitable for use in the manufacture of pressure vessels, boilers, and heat exchangers.
The pressure and temperature ratings for seamless steel tube P275NL1, EN 10216-3 are determined by various factors such as the thickness of the tube, the diameter, and the operating conditions. Generally, the pressure rating for this material is determined based on the allowable stress values and design codes such as ASME Boiler and Pressure Vessel Code, EN 13445, or AD 2000.
The temperature rating for seamless steel tube P275NL1, EN 10216-3 is also determined based on the maximum operating temperature of the material. The maximum operating temperature is limited by the material properties, such as the tensile strength, yield strength, and ductility, as well as the design codes and standards.
In general, the pressure rating for seamless steel tube P275NL1, EN 10216-3 ranges from 2,000 psi to 10,000 psi, depending on the size and thickness of the tube. The temperature rating ranges from -50°C to 400°C, depending on the operating conditions and the design codes and standards.
It is important to consult the relevant design codes and standards to determine the appropriate pressure and temperature ratings for seamless steel tube P275NL1, EN 10216-3, and to ensure that the material is suitable for the specific application.

Standard marking

The standard marking of steel tubes typically includes the following information:
1. Manufacturer's name or trademark
2. Product name or code (in this case, "Seamless Steel Tube P275NL1")
3. Standard number (EN 10216-3)
4. Steel grade (P275NL1)
5. Size and dimensions (outer diameter, wall thickness, and length)
6. Heat number or batch number for traceability
7. Any additional information or symbols required by the standard or customer specifications.
In the case of Seamless Steel Tube P275NL1, EN 10216-3, the marking would indicate that the tube is a seamless steel tube made according to the European standard EN 10216-3. The steel grade is P275NL1, which refers to a low-temperature carbon steel with a minimum yield strength of 275 MPa. The marking would also include the dimensions of the tube, heat number, and any additional information required by the standard or customer.

Standard packing for steel Tubes

Packing for steel tubes is an important aspect of the manufacturing and transportation process to ensure the safety and protection of the product during handling and shipping. The packing standard for steel tubes may vary depending on the industry, product specifications, and transportation requirements.
However, in general, the following are the common packing standards for steel tubes:
1. Bundles: Steel tubes are often packed in bundles. The tubes in a bundle are tightly tied together using steel straps or plastic wrapping to prevent them from coming apart during transportation.
2. Wooden Crates: Steel tubes can also be packed in wooden crates to provide additional protection during transportation. The crates are designed to accommodate the tubes and may be lined with foam or other materials to prevent damage.
3. Plastic Caps: The ends of the steel tubes are typically protected with plastic caps to prevent damage to the ends during transportation.
4. Labels and Markings: The steel tubes are labeled and marked with important information such as product specifications, destination, and handling instructions to ensure proper handling during transportation.
It is important to follow the relevant standards and guidelines for packing steel tubes to ensure the safety and protection of the product during transportation.

Supplier

TAP Vietnam International Investment Joint Stock Company (TAP Vietnam) is a leading supplier of Seamless Steel Tube P275NL1, EN 10216-3 in Vietnam. The company has established a reputation for delivering high-quality steel products and has become a trusted partner for clients in various industries.
Seamless steel tubes are widely used in industries such as oil and gas, petrochemicals, power generation, and construction. These tubes are used in critical applications where reliability and durability are essential. TAP Vietnam understands the importance of quality and reliability in these applications and has made it their mission to provide seamless steel tubes that meet or exceed industry standards.
The P275NL1 steel grade is a non-alloy low-temperature quality steel that is primarily used in pressure vessel construction. The EN 10216-3 standard specifies the technical delivery conditions for seamless tubes of circular cross-section made of fine-grain steel. These tubes are used in the construction of pressure equipment that is subject to high-pressure and high-temperature conditions.
TAP Vietnam's seamless steel tubes are manufactured using the latest technology and equipment, ensuring that the tubes meet the strictest quality standards. The company's team of experts has extensive experience in the steel industry and is committed to delivering products that meet the specific needs of clients.
In addition to supplying seamless steel tubes, TAP Vietnam also offers a range of related services, including cutting and machining, heat treatment, and surface treatment. These services are designed to provide clients with a complete solution for their steel tube requirements.
TAP Vietnam is committed to providing its clients with exceptional service and support. The company's team of professionals is available to answer any questions and provide technical assistance as needed. The company also offers flexible delivery options to ensure that clients receive their orders in a timely and efficient manner.
In conclusion, TAP Vietnam International Investment Joint Stock Company is a trusted supplier of Seamless Steel Tube P275NL1, EN 10216-3 in Vietnam. The company's commitment to quality, reliability, and customer service has made it a preferred partner for clients in various industries. With its extensive experience and expertise, TAP Vietnam is well-positioned to meet the evolving needs of the steel industry and provide its clients with the best possible solutions.

Dimensions Seamless Steel Tube, EN 10216-3

dimensions in mm

Outside
diameter D
Series^a

Wall thickness T

1.6

1.8

2.3

2.6

2.9

3.2

3.6

4.5

5.6

6.3

7.1

8.8

12.5

14.2

10.2

12.7

13.5

17.2

21.3

25.4

26.9

31.8

33.7

42.4

44.5

48.3

60.3

63.5

76.1

82.5

88.9

101.6

108

114.3

127

133

139.7

141.3

152.4

159

168.3

177.8

193.7

219.1

244.5

273

323.9

355.6

406.4

457

508

559

610

660

711

Outside
diameter D
Series^a

Preferred dimensions
dimensions in mm

17.5

22.2

100

10.2

12.7

13.5

17.2

21.3

25.4

26.9

31.8

33.7

42.4

44.5

48.3

60.3

63.5

76.1

82.5

88.9

101.6

108

114.3

127

133

139.7

141.3

152.4

159

168.3

177.8

193.7

219.1

244.5

273

323.9

355.6

406.4

457

508

559

610

660

711

^aseries 1 = diameters for which all the accessories needed for the construction of piping system are standardized;
series 2 = diameters for which not all the accessories are standardized;
series 3 = diameters for special application for which very few standardized accessories exist.

Tolerances on outside diameter and on wall thickness

Outside diameter D mm

Tolerances on D

Tolerances on T for a T/D ratio

D ≤ 219,1

±1% or ± 0,5 mm whichever is the
greater

≤ 0,025

> 0,025
≤ 0,050

> 0,050
≤ 0,10

> 0,10

D ≥ 219,1

± 12,5 % or ± 0,4 mm whichever is the greater