Seamless Steel Tube P460N, EN 10216-3

Product info

Supplier:	Tapgroup internation.,JSC
Address:	Số 32 Lô N4D, đường X2A, Yên Sở, Hoàng Mai, Hà Nội
Phone:	0084 933 86 77 86
Email:	info@tapgroup.vn
Website:	https://supplier-pipe-tube-ongthep.com
Insurance:	12 tháng
Status:	Mới 100%
Origin:	China, Korea, Malaysia, Thailand, Japan, EU, G7

Catalogue Profile

Description
Dimensions Seamless Steel Tube, EN 10216-3

Product Name:

Seamless Steel Tube P460N, EN 10216-3

The alternative name or alias of a product:

Seamless Steel Pipe P460N, EN 10216-1

SMLS Pipe P460N

SMLS Tube P460N

Product Description:

• Material: P460N, Non alloy steel Steel
• Number 1.8905
• Type: Seamless (SMLS)
• Standard: EN 10216-3
• Size:
• Outer Diameter (OD): OD10.2 to OD711
• Wall Thickness (WT): 1.6mm, 1.8mm, 2.0mm, 2.3mm, 2.6mm, 2.9mm, 3.2mm, 3.6mm, 4.0mm, 4.5mm, 5.0mm, 5.6mm, 6.3mm, 7.1mm, 8.0mm, 8.8mm, 10.0mm, 11mm, 12.5mm
14.2mm, 16.0mm, 17.5mm, 20.0mm, 22.2mm, 25.0mm, 28.0mm, 30.0mm, 32.0mm, 36.0mm, 40.0mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 80mm, 90mm, 100mm,
• Length: 6000mm To 12000mm
• Surface Treatment: Fusion Bonded Epoxy (FBE, Three-Layer Polyethylene (3LPE), Three-Layer Polypropylene (3LPP), Coal Tar Enamel (CTE), Concrete Weight Coating (CWC), Hot-Dip Galvanizing (HDG), Zinc-Rich Paint Coating: Zinc-rich paint, Aluminum, Ceramic Coating, Polymer Coating, Polyurethane Coating,
Quality Control:
• ISO 9001:, ISO 14001:2015, OHSAS 18001:2007 Quality management systems – Requirements
• Other:
. Certification:
• EN 10204 3.1: Inspection certificate type 2.1, 3.1 and 3.2 issued in accordance with EN 10204
• Shipping: Delivery of goods to the address requested by the customer

Chemical composition

Steel grade

Al tot^b

Nb+Ti+V

Steel name

Steel number

max.

Max.

max.

min.

max.

P460N

1.8905

0,20

0,60

1,00 to 1,70

0,025

0,020

0,30

0,10

0,80

0,020

0,70^e

0,020

0,05

0,040

0,20

0,22

Mechanical properties

Seamless Steel Tube P460N is a high-strength, low-alloy steel tube that is designed for use in pressure vessels, boilers, and heat exchangers. It is manufactured according to the European standard EN 10216-3.
The mechanical properties of Seamless Steel Tube P460N are as follows:

Steel name: P460N

Steel number: 1.8905

1. Tensile Strength: The minimum tensile strength of the steel tube is 570-720 MPa.

2. Yield Strength: The minimum yield strength of the steel tube is 460 MPa.

3. Elongation: The minimum elongation of the steel tube is 17%.

4. Impact Resistance: The minimum impact energy required for the steel tube is 27J at -20°C.

5. Hardness: The steel tube has a maximum hardness of 250HB.

These mechanical properties make Seamless Steel Tube P460N suitable for use in high-pressure and high-temperature applications where strength and toughness are required. It is also suitable for use in harsh environments where it may be exposed to corrosive or abrasive materials.

Inspection and testings

Seamless steel tubes are a type of high-quality steel pipe that is manufactured without any welding seam. P460N is a grade of seamless steel tube that is used in high-pressure applications, such as in the construction of boilers, pressure vessels, and pipelines.
EN 10216-3 is a European standard that specifies the technical delivery conditions for alloyed and non-alloyed seamless steel tubes for elevated temperature service. This standard covers a range of grades of steel tubes, including P460N.
The inspection and testing of seamless steel tubes, such as P460N, are essential to ensure that they meet the required standards for quality, safety, and performance. The following are some of the typical inspections and tests that may be performed on P460N seamless steel tubes:
1. Visual Inspection: This is a non-destructive test that involves a visual examination of the surface of the tube for any defects, such as cracks, corrosion, or surface irregularities.
2. Dimensional Inspection: This test involves measuring the diameter, wall thickness, length, and other physical dimensions of the tube to ensure that they are within the specified tolerances.
3. Mechanical Testing: This test involves subjecting the tube to mechanical stresses, such as tensile, hardness, or impact tests, to evaluate its strength and toughness.
4. Non-Destructive Testing: This test involves using methods such as ultrasonic testing, magnetic particle testing, or dye penetrant testing to detect any internal defects or flaws in the tube.
5. Chemical Analysis: This test involves analyzing the chemical composition of the steel used to manufacture the tube to ensure that it meets the specified requirements.
6. Hydrostatic Testing: This test involves filling the tube with water and subjecting it to high pressure to check its ability to withstand the pressure without leaking or rupturing.
Overall, the inspection and testing of seamless steel tube P460N, EN 10216-3 are critical to ensuring its quality and suitability for use in high-pressure applications.

Pressure and Temperature Ratings

Seamless steel tube P460N is a high-strength, low-alloy steel that is used in pressure vessel and boiler applications. It is produced according to the European standard EN 10216-3, which specifies the technical delivery conditions for alloyed fine-grain steel tubes for pressure purposes.
The pressure rating of P460N seamless steel tube depends on its wall thickness and operating temperature. According to EN 10216-3, the maximum allowable pressure for P460N seamless steel tube at different temperatures and wall thicknesses is:
• For wall thickness up to 60mm:
• At 100°C: 38.7 MPa
• At 200°C: 36.4 MPa
• At 300°C: 34.1 MPa
• At 400°C: 31.8 MPa
• For wall thickness between 60mm and 100mm:
• At 100°C: 33.5 MPa
• At 200°C: 31.5 MPa
• At 300°C: 29.5 MPa
• At 400°C: 27.5 MPa
The temperature rating of P460N seamless steel tube depends on its wall thickness as well. According to EN 10216-3, the maximum allowable temperature for P460N seamless steel tube at different wall thicknesses is:
• For wall thickness up to 60mm: 400°C
• For wall thickness between 60mm and 100mm: 350°C
It is important to note that these pressure and temperature ratings are for guidance only, and the actual operating conditions should always be carefully considered when selecting a tube material for a specific application.

Standard marking

Seamless steel tube P460N, according to EN 10216-3 standard, is a high-strength, low-alloy, normalized, fine-grained steel tube suitable for use in pressure equipment and for high-temperature service.
The standard marking for this steel tube typically includes the following information:
• Manufacturer's name or trademark
• Tube size (outer diameter and wall thickness)
• Steel grade (P460N)
• Standard specification (EN 10216-3)
• Heat number (unique identification number for the specific batch of steel used)
• Traceability code (to track the origin and history of the tube)
• Pressure equipment directive (PED) marking, if applicable
• CE marking (indicating compliance with relevant EU directives)
• Any additional markings required by the customer or specific application.
These markings are typically stamped or painted onto the tube surface at regular intervals, and provide important information about the tube's composition, quality, and suitability for specific applications.

Standard packing for steel Tubes

Packing for steel tubes is an important aspect of the manufacturing and transportation process to ensure the safety and protection of the product during handling and shipping. The packing standard for steel tubes may vary depending on the industry, product specifications, and transportation requirements.
However, in general, the following are the common packing standards for steel tubes:
1. Bundles: Steel tubes are often packed in bundles. The tubes in a bundle are tightly tied together using steel straps or plastic wrapping to prevent them from coming apart during transportation.
2. Wooden Crates: Steel tubes can also be packed in wooden crates to provide additional protection during transportation. The crates are designed to accommodate the tubes and may be lined with foam or other materials to prevent damage.
3. Plastic Caps: The ends of the steel tubes are typically protected with plastic caps to prevent damage to the ends during transportation.
4. Labels and Markings: The steel tubes are labeled and marked with important information such as product specifications, destination, and handling instructions to ensure proper handling during transportation.
It is important to follow the relevant standards and guidelines for packing steel tubes to ensure the safety and protection of the product during transportation.

Supplier

TAP Vietnam International Investment Joint Stock Company (TAP Vietnam) is a well-known supplier of seamless steel tubes, specifically P460N EN 10216-3. This article will discuss TAP Vietnam's products, services, and its impact on the steel industry.
TAP Vietnam specializes in manufacturing and supplying seamless steel tubes for various industries, including oil and gas, power generation, chemical processing, and mechanical engineering. The company's high-quality products are manufactured to meet international standards such as ASTM, API, JIS, DIN, and EN.
One of TAP Vietnam's flagship products is the Seamless Steel Tube P460N, EN 10216-3. This tube is made of high-strength carbon-manganese steel and is used in high-pressure applications such as power plants and gas pipelines. The P460N EN 10216-3 seamless steel tube is known for its excellent durability, toughness, and resistance to corrosion and erosion. It is also ideal for use in extreme temperatures, making it suitable for use in harsh environments.
TAP Vietnam's seamless steel tubes are manufactured using the latest technologies and techniques, ensuring that each tube meets the strictest quality standards. The company's experienced team of engineers and technicians work tirelessly to produce the best possible products, and their dedication to quality has earned them a reputation as one of the most reliable suppliers in the industry.
In addition to its high-quality products, TAP Vietnam is also known for its excellent customer service. The company's knowledgeable sales team is always available to answer any questions or concerns that customers may have, and they work closely with each customer to ensure that their specific needs are met. TAP Vietnam also offers flexible delivery options to meet the demands of its clients, ensuring that orders are delivered on time and in good condition.
TAP Vietnam's impact on the steel industry cannot be overstated. The company's commitment to quality and customer service has helped it establish itself as one of the leading suppliers of seamless steel tubes in the world. Its products are highly sought after by a wide range of industries, and its reputation for excellence has helped it build long-term relationships with many of its clients.
In conclusion, TAP Vietnam International Investment Joint Stock Company is a reliable and reputable supplier of seamless steel tubes, specifically the P460N EN 10216-3. The company's commitment to quality, customer service, and innovation has helped it establish itself as a leader in the steel industry. Whether you're in need of high-quality steel tubes for your oil and gas, power generation, chemical processing, or mechanical engineering projects, TAP Vietnam has the expertise and experience to meet your needs.

Dimensions Seamless Steel Tube, EN 10216-3

dimensions in mm

Outside
diameter D
Series^a

Wall thickness T

1.6

1.8

2.3

2.6

2.9

3.2

3.6

4.5

5.6

6.3

7.1

8.8

12.5

14.2

10.2

12.7

13.5

17.2

21.3

25.4

26.9

31.8

33.7

42.4

44.5

48.3

60.3

63.5

76.1

82.5

88.9

101.6

108

114.3

127

133

139.7

141.3

152.4

159

168.3

177.8

193.7

219.1

244.5

273

323.9

355.6

406.4

457

508

559

610

660

711

Outside
diameter D
Series^a

Preferred dimensions
dimensions in mm

17.5

22.2

100

10.2

12.7

13.5

17.2

21.3

25.4

26.9

31.8

33.7

42.4

44.5

48.3

60.3

63.5

76.1

82.5

88.9

101.6

108

114.3

127

133

139.7

141.3

152.4

159

168.3

177.8

193.7

219.1

244.5

273

323.9

355.6

406.4

457

508

559

610

660

711

^aseries 1 = diameters for which all the accessories needed for the construction of piping system are standardized;
series 2 = diameters for which not all the accessories are standardized;
series 3 = diameters for special application for which very few standardized accessories exist.

Tolerances on outside diameter and on wall thickness

Outside diameter D mm

Tolerances on D

Tolerances on T for a T/D ratio

D ≤ 219,1

±1% or ± 0,5 mm whichever is the
greater

≤ 0,025

> 0,025
≤ 0,050

> 0,050
≤ 0,10

> 0,10

D ≥ 219,1

± 12,5 % or ± 0,4 mm whichever is the greater