tapgroup

English

  • Tiếng Việt
  • English

Stainless Steel Pipe A312 Grade 800

Product info

Supplier: Tapgroup internation.,JSC
Address: Số 32 Lô N4D, đường X2A, Yên Sở, Hoàng Mai, Hà Nội
Phone: 0084 933 86 77 86
Email: info@tapgroup.vn
Website: https://supplier-pipe-tube-ongthep.com
Insurance: 12 tháng
Status: Mới 100%
Origin: China, Korea, Malaysia, Thailand, Japan, EU, G7
Catalogue Profile
Name:  Stainless Steel Pipe A312 Grade 800
Type of Pipe Seamless Pipe, A312 Grade 800 Pipe A312 Grade 800, SMLS
Welded Pipe, A312 Grade 800 Pipe A312 Grade 800, ERW
Chemical Requirements 
Grade UNS-DesignationA  Composition, %B
800 N08800 Carbon: 0.10 Manganese: 1.50 Phosphorus: 0.045  Sulfur: 0.015
Silicon: 1.00 Chromium: 19.0–23.0 Nickel: 30.0–35.0  Molybdenum: 
Titanium:  Niobium: Tanta- lum,max: NitrogenC:
Vanadium:  Copper: 0.75  Cerium: Boron: 
 Aluminum: 0.15–0.60  Other: Fe 39.5 min.    
A New designation established in accordance with Practice E527 and SAE J1086.
B Maximum, unless otherwise indicated. Where elipses (…) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
C The method of analysis for nitrogen shall be a matter of agreement between the purchaser and manufacturer.
D For small diameter or thin walls or both, where many drawing passes are required, a carbon maximum of 0.040 % is necessary in grades TP 304L and TP 316L. Small outside diameter tubes are defined as those less
than 0.500 in. [12.7 mm] in outside diameter and light wall tubes as those less than 0.049 in. [1.20 mm] in average wall thickness (0.044 in. [1.10 mm] in minimum wall thickness).
E For welded TP 316, TP 316N, TP 316LN, and TP 316H pipe, the nickel range shall be 10.0–14.0 %.
F For welded pipe, the phosphorus maximum shall be 0.045 %.
GTi 5 × (C+N) min, 0.70 max.
H The niobium content shall be not less than ten times the carbon content and not more than 1.00 %.
I The niobium content shall be not less than eight times the carbon content and not more than 1.0 %.
J Grade S34751 shall have a niobium content of not less than 15 times the carbon content.
KIron shall be determined arithmetically by difference of 100 minus the sum of the other specified elements.
LAl + Ti shall be 0.85 % min; 1.20 % max.
MNiobium (Nb) + Tantalum = 8 × Carbon min, 1.00 max.
Annealing Requirements
Grade or UNS Designation Heat Treating Temperature Cooling/Testing Requirements
TP 321H 1900 °F [1040 °C] D
TP 347H 2000 °F [1100 °C] D
TP 348H 1925 °F [1050 °C] D
TP 304H 1900 °F [1040 °C] D
TP 316H 1900 °F [1040 °C] D
TP 309H 1900 °F [1040 °C] D
TP 309HCb 1900 °F [1040 °C] D
TP 310H 1900 °F [1040 °C] D
TP 310HCb 1900 °F [1040 °C] D
S30600 2010–2140 °F D
[1100–1170 °C] D
S30601 2010–2140 °F D
[1100–1170 °C] D
S30815 1920 °F [1050 °C] D
S31272 1920 °F [1050 °C] D
S31035 2160–2280 °F D
[1180–1250 °C] D
S31254 2100 °F [1150 °C] D
S32654 2100 °F [1150 °C] D
S31277 2050 °F [1120 °C] D
S31727 1975–2155 °F  D
S32053 1975–2155 °F  D
S33228 [1080–1180 °C] D
2050–2160 °F D
[1120–1180 °C] D
S34565 2050–2140 °F D
[1120–1170 °C] D
S35315 2010 °F [1100 °C] D
S38815 1950 °F [1065 °C] D
N08367 2025 °F [1110 °C] D
N08020 1700–1850 °F D
[925–1010 °C] D
N08028 2000 °F [1100 °C] D
N08029 2000 °F [1100 °C] D
N08810 2050 °F [1120 °C] D
N08811 2100 °F [1150 °C] D
N08904 2000 °F [1100 °C] D
N08925, N08926 2010–2100 °F D
[1100–1150 °C] D
Tensile Requirements
Grade UNS Designation Tensile
Strength, min ksi [Mpa 		Yield
Strength, min
ksi [MPa]
800 N08800 75 [515] 30 [205
Wall Thickness: Welded and Seamless Wrought Steel Pipe, ANSI /ASME B36.10M
SCH 5 SCH 10 SCH 20 SCH 30 SCH STD SCH 40
SCH 60 SCH XS SCH 80 SCH 100 SCH 120 SCH 160
SCH XXS SCH XX.H        
Dimensions of Welded and Seamless Stainless Steel Pipe ANSI /ASME B36.19M
The decimal thickness listed for the respective pipe sizes represents their nominal or average wall dimensions.
NPS
Designator 		Outside Diameter Nominal Wall Thickness
Schedule 5S
mm 		Schedule 10S
mm 		Schedule 40S
mm 		Schedule 80S
mm
1⁄8 10.29 … 1.24 1.73 2.41
1⁄4 13.72 … 1.65 2.24 3.02
3⁄8 17.15 … 1.65 2.31 3.20
1⁄2 21.34 1.65 2.11 2.77 3.73
3⁄4 26.67 1.65 2.11 2.87 3.91
1.0 33.40 1.65 2.77 3.38 4.55
11⁄4 42.16 1.65 2.77 3.56 4.85
11⁄2 48.26 1.65 2.77 3.68 5.08
2 60.33 1.65 2.77 3.91 5.54
21⁄2 73.03 2.11 3.05 5.16 7.01
3 88.90 2.11 3.05 5.49 7.62
31⁄2 101.60 2.11 3.05 5.74 8.08
4 114.30 2.11 3.05 6.02 8.56
5 141.30 2.77 3.40 6.55 9.52
6 168.28 2.77 3.40 7.11 10.97
8 219.08 2.77 3.76 8.18 12.70
10 273.05 3.40 4.19 9.27 12.70
12 323.85 3.96 4.57 9.52 12.70
14 355.60 3.96 4.78B … …
16 406.40 4.19 4.78B … …
18 457.20 4.19 4.78B … …
20 508.00 4.78 5.54B … …
22 558.80 4.78 5.54B … …
24 609.60 5.54 6.35 … …
30 762.00 6.35 7.92 … …
Schedules 5S and 10S wall thicknesses do not permit threading in accordance with the American National Standard for Pipe Threads (ANSI B1.20.1).
These do not conform to the American National Standard for Welded and Seamless Wrought Steel Pipe (ANSI B36.10–1979).
Permitted Variations in Wall Thickness
  Tolerance, % from Nominal
NPS Designator Over Under
1⁄8 to 21⁄2 incl., all t/Dratios 20.0 12.5
3 to 18 incl., t/D up to 5 % incl. 22.5 12.5
3 to 18 incl., t/D > 5 % 15.0 12.5
20 and larger, welded,
all t/D ratios 		17.5 12.5
20 and larger,
seamless, t/D up to 5 % incl 		22.5 12.5
20 and larger,
seamless, t/D > 5 % 		15.0 12.5
where:
t = Nominal Wall Thickness
D = Ordered Outside Diameter
Grain Size Requirements
Grade UNS Designation Grain Size
  N08810 5 or coarser
  N08811 5 or coarser
TP 304H S30409 7 or coarser
TP 309H S30909 6 or coarser
TP 309HCb S30940 6 or coarser
TP 310H S31009 6 or coarser
S31035 7 or coarser
TP 310HCb S31041 6 or coarser
TP 316H S31609 7 or coarser
TP 316H S31609 7 or coarser
TP 321H S32109 7 or coarser
S32615 3 or finer
TP 347H S34709 7 or coarser
TP 348H S34809 7 or coarser
Pipe and Filler Metal Specification
Pipe Filler Metal
Grade UNS Designation AWS A5.9 Class UNS Designation
TP 201 S20100    
TP 201LN S20153    
TP 304 S30400 S30400 S30800, W30840
TP 304L S30403 ER308L S30883, W30843
TP 304N S30451 ER308 S30880, W30840
TP 304LN S30453 ER308L S30883, W30843
TP 304H S30409 ER308 S30880, W30840
  S30601    
TP 309Cb S30940    
TP 309S S30908    
TP 310Cb S31040    
TP 310S S31008    
  S31266 ERNiCrMo-4 N10276
    ERNiCrMo-10 N06022
    ERNiCrMo-13 N06059
    ERNiCrMo-14 N06686
    ERNiCrMo-17 N06200
  S31272    
TP 316 S31600 ER316 S31680, W31640
TP 316L S31603 ER316L S31683, W31643
TP 316N S31651 ER316 S31680, W31640
TP 316LN S31653 ER316L S31683, W31643
  S31655    
TP 316H S31609 ER316H S31680, W31640
  S31730 ERNiCr-3, or N06082, N06625, N10276
    ERNiCrMo-3, or  
    ERNiCrMo-4  
TP 321 S32100 ER321 S32180, W32140
    ER347 S34780, W34740
TP 347 S34700 ER347 S34780, W34740
TP 348 S34800 ER347 S34780, W34740
TP XM-19 S22100 ER209 S20980, W32240
TP 304 S28300 ER240 S23980, W32440
  N08367   N06625
Alloy 20 N08020 ER320 N08021
    ER320LR N08022
  N08028 ER383 N08028
  N08029 ERNiCrMo-3A N06625
    ERNiCrMo-13A N06059
  S20400 ER209 S20980, W32240
800 N08800 ERNiCr-3A N06082
800H N08810 ERNiCr-3A  N06082
  N08811 ERNiCr-3A N06082
  N08925   N06625
  N08926   N06625
End of pipe end
Plain Ends (PE) The PE pipes will generally be used for the smaller diameters pipe systems and in combination with Slip On flanges and Socket Weld fittings and flanges.
Threaded Ends (TE) The TE implementation speaks for itself, this performance will generally used for small diameters pipe systems, and the connections will be made with threaded flanges and threaded fittings.
Beveled Ends (BE) The BE implementation is applied to all diameters of buttweld flanges or buttweld fittings, and will be directly welded (with a small gap 3-4 mm) to each other or to the pipe. Ends are mostly be beveled to angle 30° (+ 5° / -0°) with a root face of 1.6 mm (± 0.8 mm).
Grooved ends (example Victaulic pipes): these are pipes that allow a quick connection, used for non-critical applications
Threaded and coupled ends (T&C), generally used for gas distribution,
Threaded connections are the most common pipe fittings used in oil and gas transportation systems. Due to external vibrations, cyclic loads, and pollution, the fitting parts may start getting loose, which could result in pipeline leaks and other environmental disasters. It is of great significance to develop a reliable technique that could provide…
Type end : Plain Ends / Beveled Ends: Tubes – Pipe
• Bevel End (BE)
• Bevel Both Ends (BBE)
• Bevel Large End (BLE)
• Bevel One End (BOE)
• Bevel Small End (BSE)
• Bevel for Welding (BFW)
• Buttweld End (BE) 		• End of Pipe (EOP)
• Flange One End (FOE)
• Plain End (PE)
• Plain Both Ends (PBE)
• Plain One End (POE)
• Thread End (TE)
• Thread Both Ends (TBE) 		• Thread Large End (TLE)
• Thread One End (TOE)
• Thread Small End (TSE)
• Threads Only (TO)
• Threads per Inch (TP I)
 Plastic End Caps for Tubing and Pipe Ends 
Pipe End Caps Pipe End Plugs Threaded Pipe Caps Threaded Pipe Plugs
Standard: Pipe of Tube
The American Society Of Mechanical Engineers American National Standards Institute
ASME B36.19M ANSI B36.19M
ASME B36.10M ANSI B36.10M
Product related keywords
Seamless Pipe, A312 Grade 800  SMLS A312 Grade 800 
Wedded Pipe, A312 Grade 800  Pipe, A312 Grade 800 ERW
STS Pipe 800  Pipe SUS 800 
Pipe SS 800  Pipe Stainless Steel 800
Stainless Steel Pipe A312 Grade 800 , SCH 5S Stainless Steel Pipe A312 Grade 800 , SCH 10S
Stainless Steel Pipe A312 Grade 800 , SCH 40S Stainless Steel Pipe A312 Grade 800 , SCH 80S
Stainless Steel Pipe A312 Grade 800 , SCH 5 Stainless Steel Pipe A312 Grade 800 , SCH 10
Stainless Steel Pipe A312 Grade 800 , SCH 20 Stainless Steel Pipe A312 Grade 800 , SCH 30
Stainless Steel Pipe A312 Grade 800 , SCH STD Stainless Steel Pipe A312 Grade 800 , SCH 40
Stainless Steel Pipe A312 Grade 800 , SCH 60 Stainless Steel Pipe A312 Grade 800 , SCH XS
Stainless Steel Pipe A312 Grade 800 , SCH 80 Stainless Steel Pipe A312 Grade 800 , SCH 100
Stainless Steel Pipe A312 Grade 800 , SCH 120 Stainless Steel Pipe A312 Grade 800 , SCH 160
Stainless Steel Pipe A312 Grade 800 , SCH XXS Stainless Steel Pipe A312 Grade 800 , SCH XX.H
Dimensions of Steel Pipes ASME B36.10 and B36.19
Seamless, Welded, Austenitic Stainless Steel Pipe, A312 Grade 800
1/2 inches  to 2 inches 
NPS 1/2" 3/4" 1" 1¼" 1½" 2"
OD 21.3 26.7 33.4 42.2 48.3 60.3
  Wall Thickness
Sch 5 1.65 1.65 1.65 1.65 1.65 1.65
Sch 5S 1.65 1.65 1.65 1.65 1.65 1.65
Sch 10 2.11 2.11 2.77 2.77 2.77 2.77
Sch 10S 2.11 2.11 2.77 2.77 2.77 2.77
Sch 20 – … – … – …
Sch 30 2.41 2.41 2.90 2.97 3.18 3.18
STD 2.77 2.87 3.38 3.56 3.68 3.91
Sch 40 2.77 2.87 3.38 3.56 3.68 3.91
Sch 40S 2.77 2.87 3.38 3.56 3.68 3.91
Sch 60 – … – … – …
XS 3.73 3.91 4.55 4.85 5.08 5.54
Sch 80 3.73 3.91 4.55 4.85 5.08 5.54
Sch 80S 3.73 3.91 4.55 4.85 5.08 5.54
Sch 100 – … – … – …
Sch 120 – … – … – …
Sch 140 – … – … – …
XXS 7.47 7.82 9.09 9.70 10.15 11.07
Sch 160 4.78 5.56 6.35 6.35 7.14 8.74
NPS = Nominal Pipe Size   O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.
DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness Length Weight
All Diameters = – 12.5% + 6.40 mm / – 0 mm Weight = + 10% / – 1.5%
2 1/2  inches  to 5 inches 
NPS 2½" 3" 3½" 4" 5"
OD 73 88.9 101.6 114.3 141.3
  Wall Thickness
Sch 5 2.11 2.11 2.11 2.11 2.77
Sch 5S 2.11 2.11 2.11 2.11 2.77
Sch 10 3.05 3.05 3.05 3.05 3.40
Sch 10S 3.05 3.05 3.05 3.05 3.40
Sch 20   …     …
Sch 30 4.78 4.78 4.78 4.78 …
STD 5.16 5.49 5.74 6.02 6.55
Sch 40 5.16 5.49 5.74 6.02 6.55
Sch 40S 5.16 5.49 5.74 6.02 6.55
Sch 60   …     …
XS 7.01 7.62 8.08 8.56 9.53
Sch 80 7.01 7.62 8.08 8.56 9.53
Sch 80S 7.01 7.62 8.08 8.56 9.53
Sch 100   …     …
Sch 120   …   11.13 12.7
Sch 140   …     …
XXS 14.02 15.24   17.12 19.05
Sch 160 9.53 11.13   13.49 15.88
NPS = Nominal Pipe Size   O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.
DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness Length Weight
All Diameters = – 12.5% + 6.40 mm / – 0 mm Weight = + 10% / – 1.5%
6 inches  to 14 inches 
NPS 6" 8" 10" 12" 14"
OD 168.3 219 273 323.9 355.6
  Wall Thickness
Sch 5 2.77 2.77 3.40 3.96 3.96
Sch 5S 2.77 2.77 3.40 3.96 3.96
Sch 10 3.40 3.76 4.19 4.57 6.35
Sch 10S 3.40 3.76 4.19 4.57 4.78
Sch 20   6.35 6.35 6.35 7.92
Sch 30   7.04 7.80 8.38 9.53
STD 7.11 8.18 9.27 9.53 9.53
Sch 40 7.11 8.18 9.27 10.31 11.13
Sch 40S 7.11 8.18 9.27 9.53 9.53
Sch 60   10.31 12.70 14.27 15.06
XS 10.97 12.70 12.70 12.70 12.70
Sch 80 10.97 12.70 15.09 17.48 19.05
Sch 80S 10.97 12.70 12.70 12.70 12.70
Sch 100   15.09 18.26 21.44 23.83
Sch 120 14.27 18.26 21.44 25.40 27.79
Sch 140   20.62 25.40 28.58 31.75
XXS 21.95 22.23 25.40 25.40  
Sch 160 18.26 23.01 28.58 33.32 35.71
NPS = Nominal Pipe Size   O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.
DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness Length Weight
All Diameters = – 12.5% + 6.40 mm / – 0 mm Weight = + 10% / – 1.5%
16 inches to 24 inches 
NPS 16" 18" 20" 22" 24"
OD 406.04 457.2 508 558.8 609.6
  Wall Thickness
Sch 5 4.19 4.19 4.78 4.78 5.54
Sch 5S 4.19 4.19 4.78 4.78 5.54
Sch 10 6.35 6.35 6.35 6.35 6.35
Sch 10S 4.78 4.78 5.54 5.54 6.35
Sch 20 7.92 7.92 9.53 9.53 9.53
Sch 30 9.53 11.13 12.70 12.70 14.27
STD 9.53 9.53 9.53 9.53 9.53
Sch 40 12.70 14.27 15.09 … 17.48
Sch 40S 9.53 9.53 9.53 … 9.53
Sch 60 16.66 19.05 20.62 22.23 24.61
XS 12.70 12.70 12.70 12.70 12.70
Sch 80 21.44 23.83 26.19 28.58 30.96
Sch 80S 12.70 12.70 12.70 … 12.70
Sch 100 26.19 29.36 32.54 34.93 38.89
Sch 120 30.96 34.93 38.10 41.28 46.02
Sch 140 36.53 39.67 44.45 47.63 52.37
XXS   …   …  
Sch 160 40.49 45.24 50.01 53.98 59.54
NPS = Nominal Pipe Size   O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.
DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness Length Weight
All Diameters = – 12.5% + 6.40 mm / – 0 mm Weight = + 10% / – 1.5%
26 inches to 48 inches 
26" > 48" Wall Thickness and Weight
NPS OD   5 5S 10
26 660 wt     7.92
kg/m 127.36
28 711 wt     7.92
kg/m 137.32
30 762 wt 6.35 6.35 7.92
kg/m 118.34 118.31 147.29
32 813 wt     7.92
kg/m 157.25
34 864 wt     7.92
kg/m 167.21
36 914 wt     7.92
kg/m 176.97
38 965 wt      
kg/m
40 1016 wt      
kg/m
42 1067 wt      
kg/m
44 1118 wt      
kg/m
46 1168 wt      
kg/m
48 1219 wt      
kg/m
26 – 48 Wall Thickness and Weight
NPS OD   10S 20 30
26 660 wt   12.70  
kg/m 202.74
28 711 wt   12.70 15.88
kg/m 218.71 272.23
30 762 wt 7.92 12.70 15.88
kg/m 132.91 234.68 292.20
32 813 wt   12.70 15.88
kg/m 250.65 312.17
34 864 wt   12.70 15.88
kg/m 266.63 332.14
36 914 wt   12.70 15.88
kg/m 282.29 351.73
38 965 wt      
kg/m
40 1016 wt      
kg/m
42 1067 wt      
kg/m
44 1118 wt      
kg/m
46 1168 wt      
kg/m
48 1219 wt      
kg/m
26 – 48 Wall Thickness and Weight
NPS OD   STD 40 XS
26 660 wt 9.53   12.70
kg/m 152.88 202.74
28 711 wt 9.53   12.70
kg/m 164.86 218.71
30 762 wt 9.53   12.70
kg/m 176.85 234.68
32 813 wt 9.53 17.48 12.70
kg/m 188.83 342.94 250.65
34 864 wt 9.53 17.48 12.70
kg/m 200.82 364.92 266.63
36 914 wt 9.53 19.05 12.70
kg/m 212.57 420.45 282.29
38 965 wt 9.53   12.70
kg/m 224.56 298.26
40 1016 wt 9.53   12.70
kg/m 236.54 314.23
42 1067 wt 9.53   12.70
kg/m 248.53 330.21
44 1118 wt 9.53   12.70
kg/m 260.52 346.18
46 1168 wt 9.53   12.70
kg/m 272.70 361.84
48 1219 wt 9.53   12.70
kg/m 284.25 377.81
NPS = Nominal Pipe Size
O.D. = Outside Diameter
WT = Walltickness
KG/M = Kilogram per meter
Dimensions are in millimeters unless otherwise indicated
Weights are in kilograms p/meter and approximately given
Related products
tapgroup

Mr. Thi

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 982 384 688
tapgroup

Ms. Hoa

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 982 803 586
tapgroup

Ms. Phương

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 971 567 341
tapgroup

Ms. Trinh

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 971 567 943
tapgroup

Ms. Trân

tapgroup Email: theptangiabao@gmail.com
tapgroup Skype:
tapgroup Hotline/ Zalo/ Wechat: +84 971 567 954

tapgroupHỒ CHÍ MINH CN1

Trụ Sở Hồ Chí Minh

Address : Số 8 đường số 20, P. Bình Hưng Hoà, Q. Bình Tân, TP. HCM

Phone : +84 982 384 688 - Email : theptangiabao@gmail.com

tapgroupHỒ CHÍ MINH CN2

Trụ Sở Hồ Chí Minh

Address : 27/9 đường Tân Thới Nhất 08, Phường Tân Thới Nhất, Q12, TP. HCM, VN

Phone : +84 982 384 688 - Email : theptangiabao@gmail.com

tapgroupBÀ RỊA - VŨNG TÀU

Chi Nhánh Bà Rịa - Vũng Tàu

Address : 2597 Đ. Độc Lập, TT. Phú Mỹ, Tân Thành, Bà Rịa - Vũng Tàu, Việt Nam.

Phone : +84 974 618 834 - Email : chinhanhtangiabao@gmail.com

Social network

tapgroup tapgroup tapgroup tapgroup

Copyright 2024 @ TAN GIA BAO DV TRADING INVESTMENT CO.,LTD
tapgroup